Customization: | Available |
---|---|
After-sales Service: | Technical Support and 5% Quality Gurantee Deposit |
Warranty: | 1 Year |
Still deciding? Get samples of US$ 4390/Set
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
(1) The advacned reactor structure can ensure the highest ozone utilization rate, utilization rate of over 92%. The cost to removal of 1 gram of COD is very low, which is 30% of the cost of general ozone oxidation. The operating cost advantage is very significant.
(2) The catalyst using a mixture of titanium and various metal oxides has much higher activity and strength than similar products in the market. It has the highest yield of hydroxyl radicals and can selectively oxidize trace amounts of COD in wastewater. The minimum COD in the effluent can be controlled below 30 mg/l, while the operating cost is controlled in the lowest range.
(3) Due to the redox chemical process occurring in the reactor, it is easy to achieve automatic control of the system, which can reduce energy consumption, save investment, and ensure the stability and reliability of the system.
(4) The reactor is fully enclosed and does not require the addition of other chemicals, which will not cause secondary pollution to the environment and wastewater. The system is safe, stable and reliable.
1. Deeply remove trace amounts of COD substances and improve the discharge standards of wastewater.
When the COD of the wastewater is between 100-150 mg/L, the hydroxyl radicals generated by the POS-Y system are used to deeply remove the COD substances and chromaticity in the wastewater. The minimum COD of the effluent can be less than 30mg/l, and the chromaticity can be less than 50 times. It can be used for further deep purification and treatment for the wastewater of coal chemical, petrochemical, printing and dyeing, pesticides, pharmaceuticals after preliminary biochemical treatment.
2. Increase the BC ratio of wastewater and improve its biodegradability.
When the COD of the wastewater is between 200-300 mg/L, the POS-Y and biochemical combination technology is used to utilize the hydroxyl radicals generated by the POS-Y system to selectively deeply oxidize and decompose the difficult to biodegrade organic compounds in the wastewater, in order to reduce the COD value of the wastewater ad increase the BC ratio of the wastewater. Then further biochemical treatment is carried out through the MBR or BAF system to meet the discharge or reuse requirements. It can be applied to the deep purification treatment of toxic or difficult to biodegradable organic wastewater discharged from production processes such as petrochemical, pharmaceutical, printing and dyeing, and pesticide enterprises.
3. Application in RO concentrated water/deep reuse system
When the concentrated water of the dual membrane device contains difficult to degrade organic matter (COD is 100-140 mg/L), the simple biochemical or physicochemical treatment cannot stably meet the standard. Then the POS Y system+ high salinity biochemistry+ POS Y reactor combination deep treatment technology is used to deeply oxidize and remove organic matter (including oil substances) in the water, and control the COD of the effluent to below 30 mg/L, which can ensure the low-cost and stable operation of RO concentrated water treatment and have deep reuse conditions. It can be applied to industrial park reuse water RO concentrated water treatment or industrial park RO concentrated water deep reuse.
We, Qingdao Rely Environmental Technology Co., Ltd., established in 2015, is a comprehensive environmental enterprise, included product research, process design, system integration, equipment manufacturing, project construction and technical services. We committed to become a professional and reliable supplier of water treatment and organic waste solutions.
The products are widely used for drinking water treatment, industrial water treatment, domestic sewage water treatment, industrial sewage treatment, air pollution control, organic waste treatment and so on. Also supply environmental and efficient water treatment chemical products.
We have good long-term cooperation with Chinese well-known universities and research institutes, assure our strong technical strength and acquired series of technical patent. Our teammates have rich experience and already completed over 100 projects in domestic and foreign, gained highly reputation from local citizens and governments. In Asia, African and South American market, we have made several big landfill leachate treatment projects, treatment capacity from 100MT to 400MT, because of reasonable design, advanced equipment and high level construction, all projects run stable and efficient, proved our strong technical strength and high quality level.
With strong technical strength, we are not only a reliable equipment supplier, but also undertake EPC general contracting projects, EPC Service offered as the following.
1) Freely Preliminary Technical Consultation
2) Treatment Process design
3) Comprehensive Project Equipment Supply
4) Installation Technical Support
5) Debugging Technical Support
Warmly welcome to cooperate with us, for cleaner water, fresher air, more blue sky and more beautiful home!
NO | Volume(M3) | Diameter(M) | Height(M) | Anti-corrosion method | Stirring power (KW) | Mixer material |
1 | 300 | 7.64 | 7.2 | Electrophoresis/enamel | 5.5 | 304/carbon steel anticorrosion |
2 | 400 | 8.41 | 7.8 | Electrophoresis/enamel | 7.5 | 304/carbon steel anticorrosion |
3 | 500 | 9.17 | 8.4 | Electrophoresis/enamel | 7.5 | 304/carbon steel anticorrosion |
4 | 600 | 9.94 | 8.4 | Electrophoresis/enamel | 11 | 304/carbon steel anticorrosion |
5 | 800 | 10.7 | 9.6 | Electrophoresis/enamel | 11 | 304/carbon steel anticorrosion |
6 | 1000 | 11.46 | 10.8 | Electrophoresis/enamel | 15 | 304/carbon steel anticorrosion |
7 | 1500 | 12.99 | 12 | Electrophoresis/enamel | 18.5 | 304/carbon steel anticorrosion |
8 | 2000 | 13.76 | 14.4 | Electrophoresis/enamel | 18.5 | 304/carbon steel anticorrosion |
9 | 3000 | 15.29 | 16.8 | Electrophoresis/enamel | 22.5 | 304/carbon steel anticorrosion |
10 | 3500 | 16.82 | 16.8 | Electrophoresis/enamel | 25 | 304/carbon steel anticorrosion |
11 | 4000 | 17.58 | 17.4 | Electrophoresis/enamel | 25 | 304/carbon steel anticorrosion |
12 | 5000 | 18.34 | 19.8 | Electrophoresis/enamel | 30 | 304/carbon steel anticorrosion |
World Class Device Partners
World Class Business Partners
1. Q: What products do you produe?
A: We are specialized in drinking water treatment, industrial water treatment, domestic sewage water treatment, industrial sewage treatment, air pollution control, organic waste treatment and so on. Also supply environmental and efficient water treatment chemical products.
2. Q: What information do we need before ordering?
A1: Pls advise your requirements for overall treatment process.
A2: Pls offer the water quality report for influent water or raw water type.
A3: Pls advise the max treatment capacity for design.
A4: Pls advise the quality demands for the effluent water or the usage of effluent water.
3. Q: How long is your lead time?
A: Generally it is 25 days, depends on your needs and project scales.
4. Do you provide OEM service?
A: We provide high-quality OEM services, and also provide buyers customized products.
5. What other services can you provide?
A: Provide free technical support at any time, and also can help you design the whole treatment process of the project.